Highway Code Rule 255
Motorway signals (see ‘Light signals controlling traffic’) are used to warn you of a danger ahead. For example, there may be an incident, fog, a spillage or road workers on the carriageway which you may not immediately be able to see.
Section: Motorways (rules 253 to 273) Subsection: Motorway signals (rules 255 to 258)Highway Code Rule 256
Signals situated on the central reservation apply to all lanes. On very busy stretches, signals may be overhead with a separate signal for each lane.
Section: Motorways (rules 253 to 273) Subsection: Motorway signals (rules 255 to 258)Highway Code Rule 257
Amber flashing lights. These warn of a hazard ahead. The signal may show a temporary maximum speed limit, lanes that are closed or a message such as ‘Fog’. Adjust your speed and look out for the danger until you pass a signal which is not flashing or one that gives the ‘All clear’ sign and you are sure it is safe to increase your speed.
Section: Motorways (rules 253 to 273) Subsection: Motorway signals (rules 255 to 258)Highway Code Rule 258
Red flashing lights. If red lights flash on a signal and a red “X” is showing, you MUST NOT drive in the lane shown as closed beyond the signal. This applies until you pass another signal indicating that the lane is no longer closed, by displaying the word “End” or a speed limit sign and you are sure that it is safe to proceed.
Red flashing lights. If red lights flash on a signal in the central reservation or on the side of the road and lane closed sign is showing, you MUST NOT go beyond the signal in any lane.
Laws
- Road Traffic Act 1988: Section 36
- The Traffic Signs Regulations and General Directions 2002: Regulation 3 and Schedule 15